|
New low-cost frequency converters allow users
to simulate world-wide power for export product testing and
duplication of military/avionics power for 400 Hz aircraft
or shipboard use.
The FC 200 Series frequency and voltage converters are
economically priced and offer top of the line performance.
The series consists of two 1
phase output instruments in size of 500VA and 1kVa.
The converters allow the user to duplicate a utility grid of
either 50 or 60 hertz for export product testing or
operation of imported equipment.
The frequency can be adjusted to 400 hertz for applications
such as the testing of military/avionics equipment or for
the operation of 400 hertz electronics that are onboard an
aircraft or a military vessel. The adjustable frequency band
of 45 to 500 Hertz in conjunction with the dual voltage
ranges of 0-150 volts or 0-300 volts provides full
capabilities for testing and operating electronics
worldwide.
Setup and operation of the FC 200 Series is exceptionally
easy. The simple front panel layout allows users to
continuously vary voltage and frequency or to select preset
standard frequency settings. Individual meter displays
provide digital readouts for frequency, voltage and current
while a digital multimeter displays power or power factor.
The FC 200 Series converters are a simple and cost effective
solution for all of your AC power conversion needs!
|
Key Features & Specifications for the FC 200 Series |
 |
Output Power: |
500 VA to 1kVA (for larger
1-phase sizes up to 40kVA see the APS 1000 Series) |
|
Output Frequency: |
45-500 Hz |
|
Output Voltage: |
Dual range, 0-150 V or 0-300 V, 1 phase |
|
Isolated Linear Output, THD: |
0.5% |
|
Input Requirements: |
115 VAC or 230 VAC, 1 phase, 47-63 Hz |
|
Intuitive Front Panel Controls: |
Frequency, Voltage and Current Limit |
|
Easy to Read LED Displays: |
Frequency, Voltage, Current and Power or Power Factor |
|
Memory Locations: |
Can
save three desired settings of any voltage, frequency
and current limit covered in the output parameters |
|
Power Outlets: |
Universal Domestic and International Connectors |
|
Option: |
PLC
Remote Interface which includes 7 memory locations |
|
Model |
FC205
|
FC210
|
|
INPUT SPECIFICATIONS
|
|
Input Phase |
1-phase
/ 2-wire + Ground
|
|
Input Voltage |
115/230Vac
± 15%
|
|
OUTPUT SPECIFICATIONS
|
|
Power Rating |
|
500VA
|
1000VA
|
|
Max Arms |
0-150V |
4.2A
|
8.4A
|
|
0-300V |
2.1A
|
4.2A
|
|
Phase |
1-phase / 2-wire + Ground
|
|
Voltage (r.m.s.) |
Low Range |
0-150V |
High Range |
0-300V |
Resolution |
0.1V |
Accuracy |
±
(0.5% of setting + 2 counts) |
|
Frequency |
Range |
45 - 500Hz |
Resolution |
0.1Hz at 45 - 99.9Hz, 1Hz at 100 - 500Hz |
|
± 0.2% |
Harmonic Distortion |
≤ 0.5% (Resistive Load) |
|
Crest Factor |
≥ 4 to 1
|
|
Load Regulation |
±
0.5% (Resistive Load)
|
|
Protection |
Over-Current, Short-Circuit, Over-Temperature
|
|
Operating Temperature |
32°F - 104°F (0°C - 40°C), 80% Relative Humidity
|
|
Altitude |
Below 6,500 Feet
|
|
DISPLAY AND CONTROLS
|
|
4 Digital LED meters |
Frequency, Voltage, Current, Power or Power Factor (simultaneously)
|
|
Memory (Standard) |
3 Memories, 3 Programmable Parameters per Memory for:
Voltage, Frequency, Current Limit
|
|
Calibration |
Front Panel Calibration
|
|
Auto-Voltage Adjust |
Provides improved voltage regulation to within ± 0.1V
|
|
MECHANICAL SPECFICATIONS
|
|
Power Rating |
|
500VA
|
1000VA
|
|
Dimensions (H/W/D) |
(in)
|
3.5/16/17
|
3.5/22/17
|
|
(mm)
|
89/406/432
|
89/559/432
|
|
Weight |
(lbs.)
|
48
|
81
|
|
(kg.)
|
22
|
37
|
|
